Owner´s Manual for JFL510ES flute

This manual provides basic instructions to ensure that you get the most enjoyment from your instrument. Please read these  instructions carefully to assist in the assembly, disassembly, and handling of your flute. Proper care and maintenance of your instrument will allow you to enjoy a lifetime of making music.

  1. Nomenclature
  2. Assembly
  3. Disassembly
  4. Inspection & Maintenance
  5. Optional Extension Kit for JFL-510ES
  6. How to use the extension kit
  7. Disassembly
  8. Owner's Manual for JFL510ES as PDF for free

1. Nomenclature


2. Assembly

  • Hold the barrel at the key post using the thumb and forefinger.
  • Connect the footjoint to the bodyjoint using a gentle twisting motion. Avoid depressing the keys during assembly.
  • Insert headjoint into the Waveline bowjoint using a gentle twisting motion.
  • Insert the Waveline bow headjoint assembly into the bodyjoint using a gentle twisting motion.
  • Adjust the lip plate so the embouchure hole is in line with the C# key on the bodyjoint.
  • The specially engraved alignment indicators located on the headjoint and bodyjoint ensure correct assembly and optimum position placement.
  • When not playing your flute place on the acrylic flute stand included with your instrument.
  • When not playing your flute place on the acrylic flute stand included with your instrument.
  • When not playing your flute place on the acrylic flute stand included with your instrument.

Step 1:

Hold the barrel at the key post using the thumb and forefinger.

Step 2:

Connect the footjoint to the bodyjoint using a gentle twisting motion. Avoid depressing the keys during assembly.

Step 3:

Insert headjoint into the Waveline bowjoint using a gentle twisting motion.

Step 4:

Insert the Waveline bow headjoint assembly into the bodyjoint using a gentle twisting motion. Adjust the lip plate so the embouchure hole is in line with the C# key on the bodyjoint.

Step 5:

The specially engraved alignment indicators located on the headjoint and bodyjoint ensure correct assembly and optimum position placement.

Step 6:

When not playing your flute place on the acrylic flute stand included with your instrument.


3. Disassembly

Step 1:

While holding the headjoint remove it from the Waveline
bowjoint with a gentle twisting motion.

Step 2:

Hold the bodyjoint and remove it from the Waveline bowjoint with a gentle twisting motion.


4. Inspection & Maintenance

  • Insert the beaded cleaning swab through the Waveline bowjoint assembly to remove excess moisture.
  • Insert the beaded cleaning swab through the Waveline bowjoint assembly to remove excess moisture.
  • Pull one corner of the swab through the end of the cleaning rod.
  • Wrap the remaining cloth around the cleaning rod. Insert the cleaning swab through the headjoint, bodyjoint, and footjoint to remove excess moisture.
  • Wipe the instrument´s surface after playing with a soft polishing cloth. When wiping, hold the instrument carefully as to not damage delicate key mechanisms or pads.

1. How to clean the Waveline bowjoint:
Insert the beaded cleaning swab through the Waveline bowjoint assembly to remove excess moisture.

2. How to clean the inner tubes (headjoint,
bodyjoint, and footjoint):
Pull one corner of the swab through the end of the cleaning rod. Wrap the remaining cloth around the cleaning rod. Insert the cleaning swab through the headjoint,
bodyjoint, and footjoint to remove excess moisture.

3. How to clean/polish the flute´s surface:
Wipe the instrument´s surface after playing with a soft polishing cloth. When wiping, hold the instrument carefully as to not damage delicate key mechanisms or pads.


5. Optional Extension Kit for JFL510ES

Optional Extension Kit for JFL510ES

Your JUPITER 510 can easily be changed into a full scale flute with a standard straight headjoint. All you need is the JUPITER 510 Extension Kit.

The JUPITER 510 Extension Kit contains the following accessories:

  • JUPITER 510 Extension Barrel
    JUPITER Straight Headjoint with .925 Sterling Riser
    JUPITER Flute Case
    JUPITER Flute Zippered Case Cover

6. How to Use the JUPITER JFL510ES Extension Kit

  • Remove the Waveline bowjoint and headjoint
  • Insert the extension barrel
  • The specially engraved alignment indicators located on the headjoint and bodyjoint ensure correct assembly and optimum position placement
  • Insert the straight headjoint. Adjust the lip plate
  • The embouchure hole has to be in line with the C# key on the bodyjoint
  • Simply remove the straight headjoint and footjoint (the extension barrel stays in the flute) and it will fit perfectly in your JUPITER flute case and case cover.

Step 1:

Remove the Waveline bowjoint and headjoint

Step 2:

Insert the extension barrel. The specially engraved alignment indicators located on the headjoint and bodyjoint ensure correct assembly and optimum position placement.

Step 3:

Insert the straight headjoint. Adjust the lip plate so the embouchure hole is in line with the C# key on the bodyjoint. Your extended JUPITER 510 is now ready to play! 

Step 4:

From now on you can use your extended JUPITER JFL510ES as a regular straight flute. Simply remove the straight headjoint and footjoint (the extension barrel stays in the flute) and it will fit perfectly in your JUPITER flute case and case cover.


7. Disassembly

Step 1:

Holding the headjoint remove it from the bodyjoint with a
gentle twisting motion.

Step 2:

Remove the footjoint from the bodyjoint with a gentle twisting
motion. Avoid depressing the keys during disassembly.


8. Owner's Manual for JFL510ES as PDF for free